F. P. Journe Chronomètre à Résonance
For the 20th Anniversary of the Chronomètre à Résonance, F.P.Journe introduces a version with a special dial that will be produced only during the year 2019. The current general release version of the Chronomètre à Résonance is supplied with a digital dial for the left timezone and analog for the right. But the new Chronomètre à Résonance will show both timezones in analog, like the first generation watches.
Two models are proposed, an 18k 6N rose gold case with rose gold dial version and another in platinum case with a white gold dial. The two dials in Silver guilloche Clous de Paris indicating the hours and minutes can also be set on two different time zones.
The movement remains the same 18k rose gold mechanism.
F. P. Journe Chronomètre à Résonance Technical Specifications
Movement: Calibre 1499.3 in 18K rose Gold Manual winding / 27 turns of crown
Dimensions: Overall diameter: 32.60 mm Casing-up diameter: 32.00 mm Overall height: 4.20 mm Height of winding stem: 2.59 mm Diameter of stem thread: S1.00 mm Diameter of reset to zero stem: S1.20 mm
Balance: 2 flat microflamed Anachron balance spring 2 mobile stud carriers 2 free sprung balance springs 2 spring laser pinned to Nivatronic collets Pinned GE studs Reset to zero button for seconds Frequency: 21,600v/h, 3Hz Inertia 10.10 mg/cm2 Angle of lift: 52° Amplitude: 0h dial up: > 320° 24h dial up: > 270° Main Characteristics: 2 independent linear escapements, 15 teeth 2 independent balances with 4 inertia weight 2 position winding crown Correction of the hour at 12h: for left dial by winding crown in one direction, and in the opposite direction for right dial Resetting of the seconds by pulling the button at 4h
Indications: Double display: Left analog – indicating 24 hours Right analog – indicating 12 hours 2 small seconds at 6h Power reserve at 11h
Power Reserve: 40 hours ± 2
Finishing: High quality Circular graining on baseplate Screw heads polished and bevelled, with chamfered slots Pegs with polished rounded ends
Case: Platinum or 18K 6N Gold Diameter: 40.00 mm Total height: 9.00 mm
Dial: 18K white or 6N Gold and white Silver guilloche counters
Number of parts: Movement without dial 286 Cased up with strap 325 Jewels 40